Home | Services | Catalogue | About Us | Community | Site Map | Contact | Links Support & Help Using This Web Site  

 

 How To Order From Our Catalogue  
 

 
Business Services
Network Cabling
Server Installations
PC Repair & Accessories
IT Audits
Finance
Credit Account Facility


Call +44
(01823) 326500

Or Email us at info@somtech.co.uk
 
 
FIBRE CHECKER
The Anritsu Fibre Checker enables quick and easy cable route checking and a solution to incorrect connections caused by labelling or installation error. The use of a red flashing optical output enables visual confirmation up to 2km. Two standard N size batteries enable up to 8 hours continuous use.
 
Features:
  • Pen style portable design.
  • Battery powered (not supplied with checker).
  • Universal 2-5mm adaptor.
200-448
 		 Anritsu Fibre Checker
 		  
200-449
 		 N Size Battery
 		  
 
ANRITSU MW9076 SERIES MINI OTDR
The MW9076 series is a small and lightweight optical time domain reflectometer (mini-OTDR) for measuring loss and locating faults in optical fibre cables at fibre installation and maintenance. It has excellent basic performance specifications including a dynamic range of 45 dB and a world-beating backscatter dead zone of just 8 meters, and the world first chromatic dispersion measurement function in an OTDR.
For the best price performance, the series includes four types of main
frame, two types of optical channel selector unit and two types of display unit.

 
Features:
  • High resolution, high dynamic range and short dead zone.
  • Single mode dual 1310/1550nm modules, MW9076B/B1
  • 3 wavelength 1310/1550/1625nm MW9076C
  • 4 wavelength 1310/1410/1550/1625nm MW9076D also measures Chromatic Dispersion in the field from one end
  • Fast real time sweep2colour display options 8.4" or 7.2"
  • Optional built-in power meters for integral optical loss test set
  • VGA output
  • 18MB internal memory can store 1600 Bellcore files or 870 Anritsu analysis files
MW9076B
 		 1310/1550nm 45 dB typical dynamic range OTDR
 		  
MW9076B1
 		 1310/1550nm 40.5dB typical dynamic range OTDR
 		  
MW9076C
 		 1310/1550/1625nm OTDR
 		  
MW9076D
 		 1310/1410/1550/1625nm OTDR and Chromatic Dispersion Measuring unit
 		  
MU250000A
 		 8.4 inch TFT-LCD display
 		  
MU250000A1
 		 7.2 inch STN-LCD display
 		  
MW9076B/C-02
 		 Optical power meter max (+3dBm)
 		  
MW9076B/C-03
 		 High power optical power meter (max +23dBm)
 		  
Z0436
 		 Hard carrying case
 		  
Z0435
 		 Soft carrying case
 		  
 
FLUKE DSP-4300 TESTER
The new DSP-4300 Digital CableAnalyzer offers a total Cat6 solution.
 
Features:
  • Exceeds specification requirements for Cat 5, Cat 5e and Cat 6 with Level III Accuracy, independently verified by both UL and ETL SEMKO.
  • Delivers more accurate PASS results with the new revolutionary Permanent Link adapter
  • Includes Cat 6 channel adapter and a channel/traffic adapter
  • Automatically diagnoses cabling faults and shows exact locations.

 
DSP-4300
 		 Fluke Digital CableAnalyzer
 		  
 
FLUKE DSP-4000 DIGITAL CABLEANALYZER
The DSP-4000 Digital CableAnalyserTM, the latest in Fluke's family of digital test tools, is designed for cable installers and network owners who need to certify high-speed, copper and fibre cabling to today's industry standards, and tomorrow's emerging standards. The DSP-4000 digital test technology delivers functionality and accuracy beyond that of analog testers. Whether, you're certifying cabling installations; troubleshooting a problem; migrating to a high-speed network; or re-certifying wiring after adds, moves and changes, the DSP-4000 is the best tool for the job.

 
Features:
  • Exceeds All Specification Requirements for Cat 5e and Cat 6.
  • Tests high-performance cable to 350 MHz.
  • Performs A Complete Two-way AutoTest In About 10 Seconds.
  • Automatically Diagnose Cabling Faults And Displays Results Graphically And In Text.
  • Monitors Network Traffic On Base-T and 100Base-TX Ethernet Systems.
  • Shows Detailed Plots Of NEXT, ELFEXT, Attenuation, ACR And Return Loss - Up to 350MHz
  • Provides Built-in Talk Mode For Two Way Voice Communication Between The Main And Remote Units.
  • Includes Free Windows®-Based DSP-LINK Software.
  • Proprietary Category 6 Adaptors Are Being Made Available - Call The Sales Office For Further Details.
DSP-4000
 		 Cable Analyser With Smart Remote.
 		  
BC 7217
 		 External Battery Charger.
 		  
BP 7217
 		 Spare Battery Pack.
 		  
DSP-4100
 		 Cable Analyser With Smart Remote
 		  
 
FLUKE DSP-4000 CABLEANALYZER FIBER TEST ADAPTER
The optional Fibre Test Adapter easily attaches to the DSP-4000 to allow bi-directional testing of multimode fibre links at 850nm and 1300nm, testing two fibres at a time.

 
Features:
  • Measures optical power. loss, length and propagation delay for multimode fibres.
  • Provides pass/fail test results based on common fibre standards.
  • May be used with a seperate source, such as the Fluke LS-1310/1550 to measure optical power and power loss of singlemode fibre at 1310nm and 1550nm.
  • Measures power at 850nm, 1300nm, 1310nm and 1550nm from optical sources, such as test equipment and optical interface cards.
  • Transmits or receives 850nm or 1300nm light for performing quick continuity checks.
  • Supports the DSP-4000 Talk Mode, allowing easy voice communication with your partner.
DSP-FTA410S
 		 Cable Analyser Fiber Test Adapter
 		  
 
FLUKE FT300 FIBER INSPECTOR
The ability to inspect fibre connectors becomes ever more important: dirt, dust and other contaminants can have a serious detrimental effect on the performance of fibre installations. The new Fluke FT300 Fiber Inspector is designed specifically for inspecting fibre terminations in patch panels, hardware devices, and cable assemblies. Comprising a miniature camera with a 250X magnifying lens, connected to a handheld LCD display, the FT300 Fiber Inspector offers the ultimate in easy-to-use inspection equipment.
 
Features:
  • Easily inspects fibre terminations both male (patch cord) and female (bulkhead).
  • Minimal training required.
  • Eliminates hazards associated with inspecting live fibre.
  • Works on both LED and Laser-based fibre systems.
  • Quick and easy to use.
  • Manual focus adjusts for each user.
  • Supplied with 4 adapter tips: ST, SC, FC and universal 2.5mm patch cord tip.
  • Rechargeable batteries with 3 hour life.
  • Will charge and test at the same time.
  • Light weight: Display handset 465g.
  • Carry case included.
FT300
 		 FT300 Fiber Inspector
 		  
 
FLUKE DSP-FTK
The Fluke DSP-FTK, when linked with the Fluke DSP-2000 adds Fibre Optic Test Capability . The unit detects Bad Connections and Splices, Broken Fibres and Power Loss caused by Bends or Mismatches. Each Kit is Supplied with a Power Source and Light Meter, ST Patch Cords and Couplers and Full Instruction Manual.
 
Features:
  • Interfaces with DSP2000.
  • Power Meter Measures at 850, 1300 and 1550nm.
  • Light Source Generates 850 and 1300nm Wavelengths.
  • Measures Both Db and Dbm.
  • Stores up to 500 Auto Test Reports.
  • To be used with the DSP-2000
DSP-FTK
 		 Fibre Test Kit
 		  
 
FLUKE FTK-100 AND FTK-200 FIBER TEST KITS
Designed as low-cost, entry level fibre test tools, the FTK-100 and FTK-200 from Fluke Networks are easy to use and rugged. Both Fibre test kits offer quick, easy measurement of multimode fibre power loss. With the addition of a laser source, both kits are also capable of loss measurements on singlemode fibre installations. Whilst the basic FTK-100 simply displays the loss measured, the FTK-200 also has the ability of storing up to 500 measurements for later download.
 
Features:
  • Standard kits measure multimode fibre loss at both 850 and 1300nm.
  • Very easy to use.
  • Rugged design and yellow over mould ensure maximum up-time.
  • Automatic battery status check.
  • Supplied with rigid protective carry case.
  • Standard LED source delivers both 850nm and 1300nm.
  • FTK-200 will store up to 500 measurements internally for later download.
  • FTK-200 is supplied with interface cable and download software.
  • Optional laser source (Fluke LS1310/1550) for singlemode applications.
  • Optional FT120 Fiber Viewer.
FTK-100
 		 Basic Fiber Tester
 		  
FTK-200
 		 Advanced Fiber Tester
 		  
 
FLUKE FT-120 AND FT-140
The FT120 and FT140 Fiber Viewers are high-quality, rugged, portable microscopes designed for field use to hold fiber optic connectors and to evaluate the quality of the end face of the connectors prior to, during and after installation. The FT120 is a 200X magnifier and the FT140 offers 400X magnification primarily for singlemode applications.
 
Features:
  • Standard 2.5 mm universal ferrule adapter.
  • Automatic infrared filters for user safety.
  • A soft carrying case.
  • A set of 10-panel instruction sheets. The instruction sheet covers both models.
  • Both units use AAA batteries. (Supplied)
  • Warranty card.
FT-120
 		 Fiber viewing scope 200x magnification for multimode
 		  
FT-140
 		 Fiber viewing scope 400x magnification for Singlemode
 		  
FTI-100/120
 		 Kit comprising FTK-100 +FT-120 in case
 		  
FTI-100/140
 		 Kit comprising FTK-100 +FT-140 in case
 		  
FTI-PRO 200/120
 		 Pro Kit containing FTK-200+FT120 in case
 		  
FTI-PRO 200/140
 		 Pro Kit containing FTK-200+FT140 in case
 		  
NF460
 		 Fibre Optic reference guide book
 		  

Last Updated: May 2002